Philips DVDR 80 manual Playing a DVD+RW or DVD+R, Playing audio CDs, Audio CD display

Playing a DVD+RW or DVD+R

1

2

If the inserted disc has been write-protected or it is a finalized

DVD+R, playback starts automatically.

If playback does not start automatically, select the title you want	￿￿￿ ￿￿￿￿	￿￿￿
to play from the index screen using CH- B or ACH+ .
You can also use the N or O buttons on the front of the
recorder.

3Press the PLAY G button.

The following will appear on the display: title/chapter number, elapsed time.

4

5

aI see the message '￿￿￿￿￿￿￿￿￿' on the display		Problem
b There are no recordings on this disc.
To stop playback, press STOP h on the remote	control or
h on the DVD Recorder.

To eject the disc, press OPEN/CLOSE J on the front of the DVD Recorder.

What do I must pay attention to with regard to recordings that have been recorded in different recording modes?

During playback, the device will automatically switch to the proper mode
'M1, M2, M2x, M3, M4, M6, M8'.
For more information, please read the section 'Selecting the recording	?
mode (quality)' in the chapter 'Manual recording'.

Playing audio CDs

You can also use the DVD Recorder to play audio CDs

1

2

Insert an audio CD. Playback starts automatically.

Audio CD display
If the TV is turned on, the Audio CD display will appear on the screen.
During playback, the number of the current track will be shown on the		Tip
screen and display.
Stop playback with	STOP h . Track number and total play time
are displayed.

48 Playback