Programming a recording without the VCR Plus+® system

1Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2Press TIMER s on the remote control.

The current information will appear on the screen.

aI will see some informations about the GUIDE Plus+® system

b The GUIDE

Plus+® system was not installed yet. Read therefore in

 

the chapter

'The GUIDE Plus+® system' the section 'Set up the

Problem

GUIDE Plus+® system'.

3Select the line with CH- B , ACH+ . Select the entry field with D or C .

4Enter information with the number buttons 0..9 .

In the entry field 'Date', you first enter the month and then the date.

Change 'AM/PM'

 

Use the blue function button to select 'AM' or 'PM' in the last input

Tip

fields of 'Start time' and 'End time'.

5When all settings are correct, confirm with OK . You can delete all the entries with the green button.

Setting up repeat recordings

 

If you have highlighted an entry, you can choose from the following

 

settings with the green function button:

 

Frequency : 'Once': once recordings

 

'Daily': Repeated daily recordings from Monday to

 

Sunday.

 

'Regularly': Repeated daily recordings when the show is

 

available.

 

'Weekly': Repeated weekly recordings (every week on

 

the same day).

 

'Off': this will stop any future occurrences of the program

Tip

from being recorded but will keep the show in the list.

 

 

7An entry with the data will appear in the 'SCHEDULE' menu. To find out how you change the data, read the section on 'How

to change or delete a programmed recording (TIMER)'.

8Insert a DVD ready for recording (without write protection). The disc is checked.

ENGLISH

Programming a recording (TIMER)

83

 

Page 95
Image 95
Philips DVDR 80 manual Programming a recording without the VCR Plus+ system, Fields of Start time and End time