Philips DVDR 80 manual Sound settings, Digital output, Analog output, Night mode

Sound settings

Depending on the audio outputs being used, this menu provides you with a selection of settings. If you are only using the analog audio outputs (red and white OUT L AUDIO R , OUT AUDIO LR jacks), select 'Off' in the 'Digital output' menu.

'Digital output'

You can select from the following settings for devices connected to the DIGITAL AUDIO OUT jack:

'All' : Dolby Digital and DTS signals are going out unchanged to the digital output. MPEG-2

multi-channel signals are converted to PCM (Pulse Code Modulation).
Use receivers/amplifiers with a digital multi sound decoder	.

'PCM only' : Dolby Digital and MPEG-2 multi-channel signals are converted to PCM (Pulse Code

Modulation).
For receivers/amplifiers without a digital multi sound decoder	.
'Off' : digital output is off.
For devices with an analog audio input.

'Analog output'

You can select from the following settings for devices connected to the analog outputs ( OUT L AUDIO R , OUT AUDIO LR ).

'Stereo' : For devices that use neither DolbySurround nor TruSurround. Only use this setting when the DVD Recorder is connected to a stereo TV.

'Surround' : Dolby Digital and MPEG-2 multi-channel are mixed to a Dolby Surround-compatible two-channel output signal.

For devices with a Dolby Surround / Pro Logic decoder .

'Night mode'

Night mode optimizes the sound dynamics at low volume. This causes less disturbance in quiet environments. This setting only functions with Dolby Digital Audio on DVDs.

Digital output

Analog output

Night mode

Sound

All

Stereo

Off

88 User preferences