27
Adding and deleting TV channels manually
With this function you can delete/switch off TV channels on which reception is not possible.
They will be skipped when the ACH+ and CH- Bbuttons are selected.
ATTENTION !
If data from the GUIDE Plus+®system is available, the allocation (TV channel name to the TV
channel) will be done from the GUIDE Plus+®system automatically. Therefore you cannot select
this function.
aI can not select the line 'Add/Delete Channels'
To switch the channels on or to change the allocation manually
proceed as follows:
1Press GUIDE/TV . The 'LISTINGS' screen appears.
2Press repeatedly ACH+ to select he menu bar at the top of the
screen.
3Select with Dor C'SETUP'.
4Select with CH- Bor ACH+ 'Change channel display' and
confirm with OK.
5Select with CH-B,ACH+ the TV-Station. With O,Nyou
can switch one page for or back.
6Enter in the right colum the TV channel with the number buttons
0..9 . You can switch the channel on or off with the green function
button.
7End with GUIDE/TV.
8Switch off the Recorder with STANDBYm.
The new settings will be taken if the Recorder is switched on again. Problem
1Turn on your TV. If required, select the TV's Audio/Video In (or
channel 3 or 4).
2Press STANDBY mto turn on the DVD Recorder. Press the
SYSTEM-MENU button on the remote control. The menu bar
will appear at the top of the screen.
3Select 'A' using Dor C.
4Press CH- Brepeatedly to select 'Installation' and then press
C.
5Select line 'Add/Delete Channels' using CH- Bor
ACH+ the press C.
Installation
Add/DeleteChannels
...
• Channel001 Add
Channel002 Add
Channel003 Delete
Channel004 Delete
Channel005 Delete
Channel006 Delete
...
To exit press
SYSTEMMENU
6Using CH- Bor ACH+ select the TV channel that you want to
delete or add.
7Press Cor Dto choose 'Add'or'Delete'.
8Repeat steps 6to 7until you have added/deleted all the TV
channels you want.
ENGLISH
Installing your DVD Recorder