Philips DVDR 80 manual Setting the time/date automatically, Confirm with, Select Automatic with

Setting the time/date automatically

This function uses the information sent via the local PBS channel to automatically set the time/date. For this reason, you must enter the PBS channel that sends this additional information. When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong, you must manually set the date/time (see section 'Manually setting the time & date').

Attention!

If data from the GUIDE PLus+® system were loaded, you can not change the clock/date because this information was taken from the GUIDE Plus+® system. Therefore you can not select this function.

1Press SYSTEM-MENUon the remote control. The menu bar will appear.

2Select 'A' using D or C .

3Select line 'Installation' using CH- B or ACH+ and confirm with C .

4Select line 'Time/Date' using CH- B or ACH+ and confirm with C .

5	C .	CH- B or	ACH+ and	confirm with
	Select 'Automatic' with
	a'Not allowed' will appear on the TV screen
	b The time/date will automatically be taken from the EPG information.
	Therefore you can not set the time/date manually.				Problem

6Select the corresponding line with CH- B or ACH+ .

7Select the channel which sends the time/date information in the line 'PBS Channel' and confirm with OK . The DVD Recorder

will check whether or not the information transfer is possible.

a'Clock not set, check channel' will appear on the TV screen
b No time/date data can be received from this TV channel.	Problem
Select a different channel or 'Auto.' in line 'PBS Channel'.

8Select one of the following settings in line 'Daylight Saving':

'On': The time set corresponds to summer time (summer time activated)

'Off': The time set corresponds to the winter time (summer time is off)

Time/Date

Automatic
PBS Channel	Auto.
Daylight Saving	Off
Time Zone	Auto.

To exit press

SYSTEM MENU

30 Installing your DVD Recorder