82
6The decoded data appears after confirmation.
Changing the start/end times
1Use CH- Bor ACH+ to select the line (programmed recording)
where you want to change the times.
2Press OK .
3Select 'Start early by'or'End late by' using ACH+ or
CH- B.
Enter the information in the line using the 0..9 number buttons on
the remote control.
4Confirm with OK .
This takes you back to the listing.
Setting up repeat recordings
You can choose from the following settings with the green function
button:
Frequency :'Once': one-time recordings
'Daily': Repeated daily recordings from Monday to Friday.
'Weekly': Repeated weekly recordings (every week on
the same day).
'Off': this will stop any future occurrences of the program
from being recorded but will keep the show in the list.
Entering the recording quality
You can choose with the REC MODE button.
Quality : Recording quality 'M1,M2,M2x,M3,M4,M6,M8'. Tip
7If all information is correct, press the OK button. The
information will be stored.
8To end, press the GUIDE/TV button.
9Insert a recordable disc in the Recorder.
The disc is checked.
10 Locate on the disc the position where you want to start the
recording. Press STOP h.
If any of the TIMER blocks are in use, 'TIMER' will light up on the display.
Programming a recording (TIMER)