Connecting a cable box with Cinch or S cable

You can connect a cable box to the S-VIDEO IN or Video in and the IN L AUDIO R jacks on the recorder. Switching between jack S-VIDEO IN and Video in is done automatically. In case both jacks are occupied, the signal at jack S-VIDEO IN is given priority.

The antenna cable should also be connected to the cable box and the DVD-Recorder as shown above.

Connect the DVD-Recorder directly with your TV-set (Cable from the output jacks S-VIDEO OUT or OUT VIDEO (CVBS) directly to the TV set). If there is a video recorder or another device in between, there can be distortions in the TV pictures from the built in 'copy protection system'.

Connecting a Cable Box only with the antenna cable

•) The DVD-Recorder have to be directly connected to the TV set. If there are other devices (video recorder, decoder, satellite receiver,...) in between, there can be distortions in the TV pictures from the built in 'copy protection system'.

•) The Cable Box have to be connected before the DVD-Recorder (Cable Box - DVD-Recorder - TV set). On the jack TV OUT only the TV have to be connected.

The antenna cable should also be connected to the Cable Box and the DVD-Recorder as shown above.

20

Connecting additional devices

 

Page 32
Image 32
Philips DVDR 80 manual Connecting a cable box with Cinch or S cable, Connecting a Cable Box only with the antenna cable