Philips DVDR 80 manual Manually setting the time & date

Manually setting the time & date

If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case, switch off the automatic function.

Attention!

If data from the GUIDE PLus+® system were loaded, you can not change the clock/date because this information was taken from the GUIDE Plus+® system. Therefore you can not select this function.

1Press SYSTEM-MENUon the remote control. The menu bar will appear.

2Select 'A' using D or C .

3Select line 'Installation' using CH- B or ACH+ and confirm with C .

4Select line 'Time/Date' using CH- B or ACH+ and confirm with C .

a'Not allowed' will appear on the TV screen
b The time/date will	automatically be taken from the EPG information.	Problem
Therefore you can	not set the time/date manually.

5Select 'Manual' with CH- B or ACH+ .

6Confirm with OK .

7Change the time in line 'Time' using the number buttons 0..9 on your remote control.

8Check 'AM/PM', 'Year', 'Month', and 'Date' in the same way. To select between the fields, use CH- B or ACH+ .

Change the information with D , C or the number buttons 0..9 .

9Select one of the following settings in line 'Daylight Saving':

'On': The time set corresponds to the summer time (summer time is on)

'Off': The time set corresponds to the winter time (summer time is off)

10 When all settings are correct, confirm with OK .

11 To end, press SYSTEM-MENU .

If the setting has been confirmed with OK the automatic system is disabled.

Time/Date

Manual
Time	09:02
AM/PM	AM
Year	2003
Month	01
Date	01
Daylight Saving	Off

To exit press

SYSTEM MENU

32 Installing your DVD Recorder