aMy cable box has not switched to the other channel number

1 Check whether the cable box is connected and switched on. 2 Check the connection and position of the IR Blaster.

3 If the connection is OK, select:

'test this code again' for a new attempt.

4 Confirm with OK on the remote control.

5 For a new code, select 'No'.

6 Confirm with OK on the remote control.

aMy cable box is not displaying the channel number

 

b On your TV set, select the channel number of the cable box and

Problem

check the setting on the screen of the TV.

Finalize set

1Check the settings shown on the screen. If the settings are not correct, repeat the set-up procedure by selecting 'No, repeat setup process'. Otherwise, select 'Yes, end setup process'.

2Confirm with OK .

You will now see a screen with useful information of the GUIDE Plus+® system.

3Confirm with OK .

You will now see a message confirming the completion of the GUIDE Plus+® system set-up process.

4Confirm with OK . This completes the set-up process for the GUIDE Plus+® system. The informations will be available within

the next 24 hours.

36

The GUIDE Plus+

 

Page 48
Image 48
Philips DVDR 80 manual Finalize set, Next 24 hours, AMy cable box has not switched to the other channel number