EN
Setting the Contrast
1Press OK, 104 and OK.
2Set the desired contrast using [.
4 (Factory
3Confirm with OK.
Set the Level of Brightness for the Copier
1Press OK, 105 and OK.
2Using [, select the desired level of brightness:
4 (Factory
3Confirm with OK.
Deactivating the Button Tones
Every key press is accompanied by a sound. You can switch off the key tones on your device.
1Press OK, 007 and OK.
2Use [ to select whether you would like to turn the function on or off.
3Confirm with OK.
Configure Paper Settings
Notice
Modifying the Basic Settings
The changed settings are stored as new default settings. If you select a special function for a
Set Paper Weight
1Press OK, 201 and OK.
2Using [ select the weight of the inserted paper.
3Confirm with OK.
Set Paper Source
You can insert normal printing paper or printed docu- ments (forms) into the paper tray. You can insert special paper formats, envelopes, slides, sheets of labels or printed documents into the manual paper feed.
1Press OK, 202 and OK.
2Using [ select the paper source.
3Confirm with OK.
Setting the Paper Format
1Press OK, 203 and OK.
2Using [ select whether you would like to configure the paper format for the paper tray or whether you would like to use the manual feed.
3Confirm with OK.
4Use [ to select the desired paper format. Follow the specifications in the technical data.
5Confirm with OK.
Set Fax Transmission from the Memory
You can set whether you would like to scan or send the documents immediately or whether you would like to send the documents from the cache memory. With direct trans- mission, the document is memorised during transmission. When sending from the memory, the document is read from the memory first and then the connection made with the recipient.
Notice
Message Memory Full
If the message memory is full, the documents are scanned and sent immediately.
1Press OK, 4012 and OK.
2Select the desired setting using [.
3Confirm with OK.
Turning Page Header On/Off
Your name and number appear in the page header of each fax transmission. If you do not wish to send out your infor- mation, you can turn this function off.
1Press OK, 4014 and OK.
2Use [ to select whether you would like to turn the function on or off.
3Confirm with OK.
38 | Philips · Laserfax 5120 · 5125 · 5135 |
