Philips LPF 5135, LPF 5125, LPF 5120 Additional Fax Reception Options, Locking the Device

EN

1Press OK, 4015 and OK.

2Select the desired speed using [.

3Confirm with OK.

Configuring the Display

Configure which information should be shown on the dis- play during transmission.

1Press OK, 4016 and OK.

2Use [, to select whether the transmission speed should be displayed or current page number being transmitted should be displayed.

3Confirm with OK.

Additional Fax Reception Options

Reducing the Reception Speed

The device adjusts the transmission speed to the line qual- ity. Set a lower reception speed if this adjustment takes a long time or no connection is made.

1Press OK, 4026 and OK.

2Select a reception speed using [.

3Confirm with OK.

Set Page Adjustment

Received faxes can automatically be adjusted to the paper format inserted. You can also enter a fixed value (percent- age) for the paper adjustment

Notice

Setting the Paper Format

For automatic adjustment, the format of the inserted paper must be set correctly (see also chapter Setting the Paper Format, page 38).

1Press OK, 4024 and OK.

2Use [ to select automatic adjustment or whether you would like to enter a fixed value.

3Confirm with OK.

4Enter a Fixed Value: Enter a percentage for the com- pression between 70 and 100 percent.

5Confirm with OK.

Set a Threshold for Pagination

Some fax transmissions contain more lines than can be printed. Using the threshold for pagination, set from which value these lines are printed on the second page. All lines below this value are deleted.

1Press OK, 4027 and OK.

2Use [ to select from the following settings:

ON—All lines which lie more than three centimetres outside the page are printed on a second page. All sur- plus lines below this value are deleted.

OFF—All lines which lie more than one centimetre outside the page are printed on a second page. All sur- plus lines below this value are deleted.

3Confirm with OK.

Printing Multiple Copies

You can apply settings to your device whereby multiple copies of fax transmissions are printed out upon reception.

1Press OK, 4022 and OK.

2Enter a value from 1 to 99.

3Confirm with OK.

Locking the Device

With the locking function, you can prevent unauthorised persons from using your device. Only after entering of the correct code will it be possible to access functions or enter numbers. The lock will turn itself on again after each use of the device.

Entering the PIN Code

Notice

Entering the PIN Code

If you have already saved a code, the device will ask you to provide the old code first before you can enter a new code.

1Press OK, 921 and OK.

2Enter a four-digit PIN code.

3Confirm with OK.

4Enter the code again for confirmation purposes.

5Confirm with OK.

Locking the Keyboard

This function locks the entire keyboard of the device.

1Press OK, 922 and OK.

2Enter the four-digit PIN code.

3Confirm with OK.

4Use [ to select whether you would like to turn the function on or off.

5Confirm with OK.

Blocking Manual Dialling

This function blocks the manual dialling of telephone numbers. Numbers from the telephone book can be called. Manual dialling of emergency number is not possible.

1Press OK, 923 and OK.

2Enter the four-digit PIN code.

3Confirm with OK.

4Using [ select ONLY DIRECT..

5Confirm with OK.

40 Philips · Laserfax 5120 · 5125 · 5135