10 Telephone Lines and Additional Devices
EN
Selecting the Dialling Proc- ess
(Function is not supported in all countries and networks)
In some countries you can set the dialling mode to pulse dialling or tone dialling (DTMF tones).
Notice
Selecting the Dialling Process
Only use pulse dialling if tone dialling is not yet activated for your telephone line.
1Press OK, 053 and OK.
2Use [ to select the desired dialling process.
3Confirm with OK.
Set up the Public Switch Tel- ephone Network (PSTN)
(Function is not supported in all countries and networks)
Notice
Public Switch Telephone Network (PSTN)
You can use this function to set your device to connect to the Public Switch Telephone Net- work (PSTN). To connect to a Private Branch Exchange (PABX) see also chapter on set up Pri- vate Branch Exchange (PABX) , page 42.
Your device is automatically adjusted to the telephone net- work if you set the country correctly (see also chapter Selecting the Country, page 36). It is possible that further settings are required for the Public Switched Telephone Network (PSTN). Ask your retailer or the technical cus- tomer service department.
1Press OK, 032 and OK.
2Select the desired setting using [.
3Confirm with OK.
Set up Private Branch Exchange (PABX)
Private branch exchanges (PABX) are typical in many offices and some households. You must dial an outside line access code in order to get a connection to the public tele- phone network (PSTN) from a PABX.
Notice
Additional Telephone No Extension
An additional telephone connected to the device on a telephone socket is not considered an exten- sion.
You can set up your device for operation on an extension, indicate the length of the internal numbers (direct dial number) and save the code which must be selected in order to reach the Public Switched Telephone Network (PSTN) (= outside line access code).
Notice
Outside Line Access Code is Automati- cally Dialled
Once these settings are in place, you will no longer need to prefix the outside line access code every time you enter an external number. The device will automatically add the outside line access code in front of numbers that are the same length or longer than the configured direct dial numbers.
Set the connection type
1Press OK, 051 and OK.
2Use [ to set whether you operate your device on an extension.
3Confirm with OK.
Set the outside line access code
Enter the length of the direct dial number
1Press OK, 0521 and OK.
2Enter the appropriate length for internal numbers. Use C to delete individual characters. Assume the longest internal number, then add one digit to that. If your direct dial numbers consist of four digits, then you should input5.
3Confirm with OK.
Enter the outside line access code
1Press OK, 0522 and OK.
2Enter the outside line access code with which you reach the public telephone network. This is usually 0.
Notice
Incorrect Outside Line Access Code
In rare cases, the outside line access code may be a different number or a
3Confirm with OK.
42 | Philips · Laserfax 5120 · 5125 · 5135 |
