2Switch the device on using the on/off switch on the rear.
Notice
Automatic Changeover Between Sum- mer Time/Winter Time
With setting the country and time zone, the automatic changeover between summer and winter time is switched on. The automatic changeover is switched off if you enter the devi- ance from UTC manually using the time zones editor
EN
Initial Installation
After you connect your device to the mains voltage, the device starts. During the booting process, the lights flash. Wait until the initial installation process begins.
Selecting the Language
1Use [ to select the desired display language.
2Confirm with OK.
Selecting the Country
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper- ating the device. Otherwise your device is not adapted to the telephone network. If your coun- try is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.
1Use [ to select the country in which you are operat- ing the device.
2Confirm with OK.
Set the Time Zone
(Function is not supported in all countries and networks)
In countries with several time zones, you can select from preset time zones or manually enter the deviance of your time zone from UTC (see also chapter on setting the time zone, page 36). In countries with one time zone, the set- ting is adjusted automatically if you set the country cor- rectly.
1Use [ to select the time zone in which you are oper- ating the device.
2Confirm with OK.
Entering Name
Your name and number are added together with date, time and page number at the top edge of each fax transmission (= header).
1Enter the name using the keys
Notice
Enter Letters
Enter capital letters by pressing and holding
úkey. You can enter space using ½.
To insert special characters and symbols, press ;ü. Press ûü to insert language spe- cific special characters. Select with [. Con- firm with OK.
You can move the cursor using [. Use Cto delete individual characters.
2Confirm with OK.
Entering Number
1Enter your number.
Notice
Enter Special Characters and Symbols
To insert special characters and symbols, press ;ü. Select with [. Confirm with OK.
You can move the cursor using [. Use C to delete individual characters.
2Confirm with OK.
Entering the Date and Time
1Enter the date (two digits for each field), for example 31¦05¦25 for May 31th, 2025.
2Enter the time, e.g. 14 00 for 2 pm.
3Confirm with OK.
Initial Operation · Initial Installation | 15 |
