3Remove the toner cartridge by gripping the handle in the middle and pulling it forwards out of the device

4Remove the tape and protective paper, but do not remove the protective strip from the car- tridge yet .

DANGER!

Escaping Toner Dust!

Never open a toner cartridge. If toner dust is released into the air, you should avoid allowing it to contact your skin and eyes. Do not inhale the released toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set. Never remove loose toner dust with a vacuum cleaner.

5Shake the new toner cartridge back and forth several times in order to distribute the toner evenly, thereby improving the print quality.

6Only after completely pull off the protection strip located on the left side of the cartridge.

DANGER!

Escaping Toner Dust!

Once you have removed the protection strip, do not shake the toner cartridge any

more. Otherwise, it is possible that toner EN dust will be released into the air.

7Place the toner cartridge into your device. The car- tridge should snap securely into position.

8Close the device.

CAUTION!

Toner Cartridge Not Inserted Cor- rectly!

If the device cover would not close, the toner cartridge is not inserted correctly. Take the toner cartridge out and insert it again correctly.

9Close the upper device cover.

Initial Operation · Removing Packaging Material

13