DANGER!

 

 

Escaping Toner Dust!

 

 

Once you have removed the protection

 

EN

 

strip, do not shake the toner cartridge any

 

more. Otherwise, it is possible that toner

 

 

 

 

dust will be released into the air.

 

 

 

8Place the toner cartridge into your device. The car- tridge should snap securely into position.

9Close the device.

CAUTION!

Toner Cartridge Not Inserted Cor- rectly!

If the device cover would not close, the toner cartridge is not inserted correctly. Take the toner cartridge out and insert it again correctly.

10 Close the upper device cover.

Fixing a Paper Jam

Your device is equipped with sensors that quickly recognises a paper jam. If trouble of this sort arises, the feeding of the printer paper is stopped immediately. Check all the following three areas for jammed paper: Paper tray/paper feed, print unit and fuser unit (see also the help below).

DANGER!

Escaping Toner Dust!

In case of a paper jam, do not forcefully remove the paper, but rather pull it gently out of the device and throw it away carefully. It is possible that the toner may not be completely set on the print-out, and toner dust could be released into the air. Do not inhale the released toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set. Never remove loose toner dust with a vacuum cleaner.

Clearing Paper Jam in Paper Tray/ Paper Feed

1Pull the paper tray out of the device.

2Carefully pull out the paper.

70

Philips · LaserMFD 6135hfd