Philips SFF 6135D Printing Multiple Copies, Locking the Keyboard, Locking Manual Dialling, Lock USB Storage Medium, Lock Settings, Entering the PIN Code

Printing Multiple Copies

You can apply settings to your device whereby multiple copies of fax transmissions are printed out upon recep- tion.

1Press C, 4022 and OK.

2Enter a value from 1 to 99.

3Confirm with OK.

Locking the Device

With the locking function, you can prevent unauthor- ised persons from using your device. Only after entering of the correct code will it be possible to access functions or enter numbers. The lock will turn itself on again after each use of the device.

Entering the PIN Code

Notice

Default Access Code

The function is switched off with the factory- installed access code (0000). Change the access code to switch on the function. If you want to switch the function off enter the factory -installed code 0000 again.

1Press C, 921 and OK.

Notice

Entering the PIN Code

If you have already saved a code, the device will ask you to provide the old code first before you can enter a new code.

2Enter a four-digit PIN code.

3Confirm with OK.

4Enter the code again for confirmation purposes.

5Confirm with OK.

Locking the Keyboard

This function locks the entire keyboard of the device.

1Press C, 922 and OK.

2Enter the four-digit PIN code.

3Confirm with OK.

4Use [to select whether you would like to turn the function on or off.

5Confirm with OK.

Locking Manual Dialling

This function blocks the manual dialling of telephone num- bers. Numbers from the telephone book can be called. Manual dialling of emergency number is not possible.

1Press C, 923 and OK.

2Enter the four-digit PIN code.

3Confirm with OK.

4Use [ to select ONLY DIRECT..

5Confirm with OK.

Lock USB Storage Medium

You use this function to block access to a connected EN USB storage medium.

1Press C, 925 and OK.

2Enter the four-digit PIN code.

3Confirm with OK.

4Use [to select whether you would like to turn the function on or off.

5Confirm with OK.

Lock Settings

This function blocks the changing of settings on your device. The settings can be locked with a customizable administrator pin code

Entering the PIN Code

Notice

Default Access Code

The function is switched off with the factory- installed access code (0000). Change the access code to switch on the function. If you want to switch the function off enter the factory -installed code 0000 again.

1Press C, 0001 and OK.

Notice

Entering the PIN Code

If you have already saved a code, the device will ask you to provide the old code first before you can enter a new code.

2Enter a four-digit PIN code.

3Confirm with OK.

4Enter the code again for confirmation purposes.

5Confirm with OK.

Activate and deactivate functions

1Press C, 0002 and OK.

2Enter the four-digit PIN code.

3Confirm with OK.

4Use [to select whether you would like to turn the function on or off.

5Confirm with OK.

Settings · Locking the Device 61