Notice

Outside Line Access Code is Automatically Dialled

Once these settings are in place, you will no

EN longer need to prefix the outside line access code every time you enter an external number. The device will automatically add the outside line access code in front of numbers that are the same length or longer than the configured direct dial numbers.

Set the connection type

1Press C, 051 and OK.

2Use [ to set whether you operate your device on an extension.

3Confirm with OK.

Setting the Outside Line Access Code

Enter the length of the direct dial number

1Press C, 0521 and OK.

2Enter the appropriate length for internal numbers. Use C to delete individual characters. Assume the longest internal number, then add one digit to that.

If your direct dial numbers consist of four digits, then you should input5.

3Confirm with OK.

Enter the outside line access code

1Press C, 0522 and OK.

2Enter the outside line access code with which you

reach the public telephone network. This is usually 0.

Notice

Incorrect Outside Line Access Code

In rare cases, the outside line access code may be a different number or a two-digit number. For older telephone systems, the outside line access code can be R (= Flash). Press R to enter this outside line access code. If the connection to the public telephone network is not possible, contact your telephone system supplier.

3Confirm with OK.

DSL Connection

In the event that you use a DSL modem: Connect the device to the slot intended for analogue telephones/fax machines! For additional information, please consult the operating manual of your DSL system. Ask your telephone or internet service provider if necessary.

ISDN Connection

Your device is an analogue fax device (Group 3). It is not an ISDN device (Group 4), and therefore it cannot be operated directly on an ISDN connection. In order to do this, you need either an analogue adapter or a connection for analogue terminals. Details for ISDN connections can be found in the instructions provided with the terminal adapter or the dial-up router.

Registering and De-

Registering Additional

Cordless Telephones

(Function is optional and functions only with an original adapter, which you can purchase through our order service. More information: support.service@sagem- com.com)

Normally your cordless telephone is registered with your device in the factory. In the starting mode, press OK. The display shows on which base unit and with which number the cordless telephone is registered.

You can register in all up to 4 cordless telephones with your device. Using only original cordless phones as additional cordless phones ensures optimum use of all func- tions. You can get original cordless telephones through our order service or at specialist shops.

Notice

GAP Compatible

Additional cordless telephone must be GAP- compatible.

Registering Cordless Telephone

You must first bring the cordless telephone and then your device (= base station) in the registration mode to register a cordless telephone. Follow the instructions in the operating instructions of the cordless telephone.

1Insert the Dect adapter into the USB host port on the reverse of the device.

64

Philips · LaserMFD 6135hfd