Plug one end of the spiral cable into the socket on the telephone handset. Insert the other end into the socket designated with the Ó symbol.
Connecting the Mains Cable |
| ||||
| CAUTION! |
|
| ||
|
|
| |||
| Mains Voltage at the Site of Installation! |
|
|
| |
EN | |||||
| |||||
| Check whether the mains voltage of your |
|
| ||
|
|
|
| ||
| device (indicated on the type label) matches |
|
|
| |
| the mains voltage available at the setup loca- |
|
|
| |
| tion. |
|
| ||
|
|
|
|
|
1Insert the mains cable into the connection located on the rear side of the device. Plug the power cable into the electrical outlet.
Connect the telephone cable to the device by inserting it in the socket designated with
tor). Insert the telephone plug into your PTT line socket.
CAUTION!
Connection to an ISDN system!You can not connect your devices directly to the digital output of the ISDN system. Details for ISDN connections can be found in the instructions provided with the terminal adapter or the
Notice
Connection to Private AutomaticBranch ExchangeIf you connect your device as extension to a telephone system, you must set it for working as an extension (also see Chapter Telephone Lines and Additional Devices, page 63).
2Switch the device on using the on/off switch on the rear.
Initial Operation · Connecting the Telephone Handset | 15 |