6Only after the restart, connect the device to your PC with a typical USB cable. The USB port of your device can be found on the rear side.

Notice

Only high-speed certified USB cable

EN

Use only a custom high speed certified USB cable to connect the device to your computer. The cable should be no longer than 1.5 metres.

7Your device is detected as a new peripheral device and registered.

8If your operating system is Windows XP (Service Pack 2), an additional window will appear during the final installation. Select No, not this time, and click on Next.

9Under Windows XP, select Install software auto- matically during the final installation and click on Next.

Companion Center SFX · Installing the Driver and Software

19