to each USB connection. Do not connect additional

 

devices—such as batteries, fans, charging devices—to

 

your machine. The device only recognises storage

 

media which are formatted with FAT16 or FAT32.

 

NTFS is not supported.

EN

Never pull out the storage medium while the device is

 

accessing it. This could cause data to be damaged or

 

lost.

 

When carrying out a Firmware update only use the

 

Firmware file for your device from the website:

 

www.sagemcom.com. Using other Firmware files can

 

lead to your device not functioning properly. Sagemcom

 

accepts no liability for device malfunctions which can be

 

traced back to the use of third party Firmware.

 

The firmware running on the device is partly licensed

 

under GPL. If you have any questions about the licensing

 

of a specific part of the firmware, feel free to contact us

 

on the email address: support.service@sagemcom.com.

 

We can send you a CD containing the relevant source

 

code for the cost of production.

Consumable Materials

Use only original consumable materials. These are available from a specialised retailer or through our order service (see back side of this user manual). Other consumable materials could damage the device or shorten its service life.

Dispose of old consumable materials according to the waste regulations of your country.

Caution when Handling Toner Powder:

If you breathe in toner powder, go into the fresh air immediately. Call a doctor immediately!

If you get toner powder in your eyes, rinse them with a lot of water for at least 15 minutes. Call a doctor imme- diately!

If you have swallowed toner powder, drink small amounts of water. Try NOT to vomit. Call a doctor immediately!

Never open a toner cartridge. Store both new and used cartridges in a place where they will not come into the hands of children.

In case of a paper jam, remove the paper carefully out of the device. Throw the paper away carefully: It is possible that the toner may not be completely set on the print-out, and toner dust could be released into the air.

If toner dust is released into the air, you should avoid allowing it to contact your skin and eyes. Do not inhale the released toner dust. Remove the toner dust from clothing or objects with cold water; hot water would only cause the toner to set. Never remove loose toner dust with a vacuum cleaner.

Repairs

The fuser unit and and its surroundings inside the device become hot during operation. Do not touch these parts if you have opened the device. Proceed with care when you are removing a paper jam for instance.

Should disruptions occur, follow the instructions on the display and on the error report.

Do not make any repairs to the device yourself. Improper maintenance can result in injuries or damage to the device. Only have your device repaired by an authorised service centre.

Do not remove the type label from your device; this would void the warranty.

Laser Safety

With specific reference to lasers, the equipment complies with laser product performance standards set by governmental, national, and international agencies as a Class 1 Laser Product. It does not emit hazardous light, as the beam is totally enclosed during all phases of customer operation and maintenance.

Direct (or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the oper- ator. Only a qualified service technician should open the device and carry out service operations.

ÃClass 1 Laser Product

6

Philips · LaserMFD 6135hfd