14 Set the desired contrast using [.

-/1—Reduces the contrast / typeface appears lighter

4 (Factory settings)—Optimized adaptation for all documents

+/7—Increases the contrast / typeface appears darker (for example, documents with faint print)

15 Confirm with OK.

16 Using [, select the desired level of brightness:

-/1—Reproduction is lighter

4 (Factory settings)—Optimized adaptation for all documents

+/7—Reproduction is darker

17 Press o. The document is scanned and transferred to the computer.

18 If you want to scan a multiple page document with the flatbed scanner, insert another page and select NEXT PAGE with [NEXT PAGE .

19 Confirm with OK.

Scan Document and Save onto a USB Storage Medium

CAUTION!

Compatible USB Storage Media!

Ensure that the power of a USB device does not exceed the permitted amp limit of the USB connection. You can only connect one high power device (USB 2.0) to each USB con- nection. Do not connect additional devices— such as batteries, fans, charging devices—to your machine. The device only recognises storage media which are formatted with FAT16 or FAT32. NTFS is not supported.

Notice

Analysing USB Storage Medium

If a lot of documents are saved on the USB storage medium, it can take a while for the USB storage medium to be analysed. You can

interrupt the process at any time, by pressing j.

You can scan documents with your device and save them as JPG-, PDF-, or TIFF-files on a connected USB storage medium.

Notice

Folder Destination

The files will be stored in the folder \[device name]\Scan on the USB storage medium. If this folder does not exist, then it will be cre- ated.

1Insert the document.

2Make sure that a USB storage medium is connected to the USB host port on the front or on the backside of the device. Connect a USB storage medium as required.

EN

Notice

Selection Menu for USB Storage Media

The selection menu for USB storage media appears on the display as soon as you connect a USB storage medium (USB stick, external hard drive etc.) to the USB host port on the front of the device.

3Using [ SCAN TO USB select from the menu or press C, 913 and OK.

Notice

Access Function

You can also call the function by pressing

C, 32 and OK.

4Using [, select whether you want to scan the doc- ument in greyscale or in colour.

5Confirm with OK.

6Enter a name for the file.

You can enter characters using the numeric keys (see key labels). Enter special characters using 0. Press the respective key several times until the desired character or special character appears on the display.

Notice

Navigating in the Editor

You can move the cursor using [. Use C to delete individual characters.

7Confirm with OK.

8Using [, select whether you would like to save the file as an image file or as a PDF file.

Notice

Select the File Format

For an image file, you can select whether you would like to save the file in TIFF or JPEG format (see also chapter on Selecting File Format, page 58).

9Confirm with OK.

Scanner · Scan Document and Save onto a USB Storage Medium

23