13 Settings

Notice

Modifying the Basic Settings

The changed settings are stored as new default settings. If you select a special function for a one-time process, take care to restore the default settings or factory settings after that.

Notice

Calling the Web Interface

You can also edit the device settings with the device's web interface (see also the chapter Web Interface, page 20).

Notice

Navigating in the Menu

You can move the cursor using [. Press C to return to the previous menu level. Press j to close the menu and return to the starting mode.

Set Up Power SavingFunction

You use this function to set after what period of time the device switches to power saving mode following the print job. Whenever you receive a fax or if you would like to print or make a copy, your device will automatically switch back from its energy saving mode to its operating mode.

1Press ECO.

2Use [ to select POWER SAVE.

3Confirm with OK.

Notice

Access Function

You can also call the function by pressing C, 0021 and OK.

4Select the time (in minutes) after which the device should switch to power saving mode using [. You can choose between: 0, 2, 10, 30 minutes (factory default: 2 minutes). Select 0 if the device should switch to the power saving function immediately after a print job.

5Confirm with OK.

Set Up Toner SavingFunctionEN

You use this function to switch on the toner saving func- tion. The print appears a little paler, thereby increasing the number of pages that you are able to print with one toner cartridge.

1Press ECO.

2Use [ to select TONER SAVE.

3Confirm with OK.

Notice

Access Function

You can also call the function by pressing

C, 0022 and OK.

4Use [to select whether you would like to turn the function on or off.

5Confirm with OK.

Set Up Paper Saving

Function

Using this function, switch on automatic Duplex printing for printing and copying in order to save paper. With Duplex printing, both sides of the paper are printed.

1Press ECO.

2Use [ to select PAPER SAVE.

3Confirm with OK.

Notice

Access Function

You can also call the function by pressing

C, 0023 and OK.

4Select one-sided print (Simplex) or double-sided print (Duplex) using [.

5Confirm with OK.

Settings · Set Up Power Saving Function

55