Philips SFF 6135D Deregistering Cordless, Telephone, Looking for Cordless Telephone, Connection to the Device, Connection to the Telephone Line, Starting Fax Reception

2A message appears on the display as soon as the device is configured as base unit. Bring the cordless telephone into registration mode.

3Press C, 521 and OK on the device.

The cordless telephone is automatically registered. This process can take a few minutes. Then the number with which it is registered with the device appears on the display of the cordless telephone.

Notice

Registering other Cordless Telephones

You can register other cordless telephones with your device in the same manner. If you face any difficulties in registering, de-register all cordless telephones, and re-register them individually.

Notice

Display Date and Time

Date and time of the cordless telephone is continually synchronised with the device.

Deregistering Cordless

Telephone

You can deregister a cordless telephone either from the device or from the cordless telephone. Follow the instructions in the operating instructions of the cordless telephone.

1Press C, 522 and OK.

2Using [to select which cordless telephone you are would like to de-register.

3Confirm with OK. The device disconnects from the cordless telephone.

Looking for Cordless Telephone

This function helps you in locating cordless telephones, which you have misplaced. For this purpose the cord- less telephones must be registered with the device and must be within its range.

1Press C, 523 and OK.

2All cordless telephones registered with the device

ring for approx. one minute. You can end the search function by pressing jon the device or pressing the button to hang up on the cordless telephone.

Connecting Additional

Devices

You can operate additional devices on a telephone line,

such as cordless telephones, answering machines, EN modems or charge counters.

Connection to the Device

You can connect additional devices directly to your

device. Insert the telephone cable of the additional device into the AUX./Òsocket (RJ-11-connection) on

the device.

Connection to the Telephone Line

In order for the fax switch to function, the device must be first in the series if multiple devices are connected to the same telephone socket. Follow the correct order.

Notice

Connection to the First TelephoneSocket

If you have multiple telephone sockets for the same telephone line, the device must be connected to the first telephone socket.

Using Additional Telephones (Easylink)

With the Easylink function you can control your device with additional telephones. To use this function, additional telephones must be set to the tone dialling mode (DTMF/MFV tones) (for this purpose see the operating manual of your additional telephone).

Starting Fax Reception

If you pick up at an additional device and hear that you are receiving a fax (whistling tone or silence), you can start the fax reception by pressing *5 on the additional telephone or pressing o on the device.

Hang up the additional telephone when the ring tone changes. The device has accepted the reception of the fax message.

Telephone Lines and Additional Devices · Connecting Additional Devices 65