Initial Installation

After you connect your device to the mains voltage, the device starts. During the booting process, the lights flash. Wait until the initial installation process begins.

EN

Selecting the Language

1Use [ to select the desired display language.

2Confirm with OK.

Selecting the Country

CAUTION!

Setting the Country Correctly!

You must set the country in which you are operating the device. Otherwise your device is not adapted to the telephone network. If your country is not included in the list, you must select a different setting and use the correct telephone cable for the country. Consult your retailer.

1Use [to select the country in which you are oper- ating the device.

2Confirm with OK.

Set the Time Zone

(Function is not supported in all countries and networks)

In countries with several time zones, you can select from preset time zones or manually enter the deviance of your time zone from UTC (see also chapter on setting the time zone, page 56). In countries with one time zone, the setting is adjusted automatically if you set the country correctly.

1Use [ to select the time zone in which you are operating the device.

2Confirm with OK.

Notice

Automatic Changeover Between Summer Time/Winter Time

With setting the country and time zone, the automatic changeover between summer and winter time is switched on. The automatic changeover is switched off if you enter the deviance from UTC manually using the time zones editor

Entering Name

Your name and number are added together with date, time and page number at the top edge of each fax transmission (= header).

1Enter your name. You can enter characters using the

numeric keys (see button labels). Enter special char- acters using 0. Press the respective button several times until the desired character or special character appears on the display.

Notice

Navigating in the Editor

You can move the cursor using [. Use C to delete individual characters.

2Confirm with OK.

Entering Number

1Enter your number.

2Confirm with OK.

Entering the Date and Time

1Enter the date (two digits for each field), for example 31¦05¦25 for May 31th, 2025.

2Enter the time, e.g. 14 00 for 2 pm.

3Confirm with OK.

Connecting to the

Computer

Using the USB cable, you can connect your device to a PC that is connected to a network. Other PCs on this network can then access the device if it is shared for use on the network. You cannot connect the device directly to a network with a USB cable, unless you have a USB print server connection.

You can connect the device to a computer and use it as a printer or scanner. You'll find the software on the supplied installation CD Companion Center SFX. In this way, you can scan and edit photos and texts, send and receive faxes and access the device's web interfaces, with which you can change many settings.

Notice

Network Connection

You can find information about installing your device in a network in chapter Networks (see also chapter Networks, page 50)

16

Philips · LaserMFD 6135hfd