The Initial Setup menu
Audio In settings
NICAM Select
• Default setting: NICAM
Initial Setup |
|
|
Basic | NICAM Select | NICAM |
Tuner | Tuner Level | Regular Audio |
Video In/Out | External Audio |
|
Audio In | Bilingual Recording |
|
Audio Out | Input Level (L1) |
|
Language | Input Level (L2) |
|
Recording | Input Level (L3) |
|
Playback |
|
|
If you want to record the
Tuner Level
• Default setting: Normal
Initial Setup |
|
|
Basic | NICAM Select | Normal |
Tuner | Tuner Level | Compression |
Video In/Out | External Audio |
|
Audio In | Bilingual Recording |
|
Audio Out | Input Level (L1) |
|
Language | Input Level (L2) |
|
Recording | Input Level (L3) |
|
Playback |
|
|
Set to Compression if the audio level from the
External Audio
• Default setting: Stereo
Initial Setup |
|
|
Basic | NICAM Select | Stereo |
Tuner | Tuner Level | Bilingual |
Video In/Out | External Audio |
|
Audio In | Bilingual Recording |
|
Audio Out | Input Level (L1) |
|
Language | Input Level (L2) |
|
Recording | Input Level (L3) |
|
Playback |
|
|
If the external source is standard stereo, leave set to Stereo. If each channel carries a separate soundtrack, change to Bilingual.
12
Bilingual Recording
• Default setting: A/L
Initial Setup |
|
|
Basic | NICAM Select | A/L |
Tuner | Tuner Level | B/R |
Video In/Out | External Audio |
|
Audio In | Bilingual Recording |
|
Audio Out | Input Level (L1) |
|
Language | Input Level (L2) |
|
Recording | Input Level (L3) |
|
Playback |
|
|
When recording a bilingual source from an external input in Video mode or VR mode set to FINE/MN32, you can choose to record either the A/L (left), or the B/R (right) audio channel.
Note
•If you’re recording in VR mode (except when set to FINE/MN32), both channels will be recorded and you can switch them as you like on playback.
Input Level (L1 / L2 / L3)
• Default setting: 0dB
Initial Setup |
|
|
Basic | NICAM Select | +6dB |
Tuner | Tuner Level | +3dB |
Video In/Out | External Audio | 0dB |
Audio In | Bilingual Recording | – 3dB |
Audio Out | Input Level (L1) | – 6dB |
Language | Input Level (L2) |
|
Recording | Input Level (L3) |
|
Playback |
|
|
You can adjust the gain of the audio from each external input individually, from
Audio Out settings
Digital Out
• Default setting: On
Initial Setup |
|
|
Basic | Digital Out | On |
Tuner | Dolby Digital Out | Off |
Video In/Out | DTS Out |
|
Audio In | 96kHz PCM Out |
|
Audio Out | MPEG Out |
|
Language |
|
|
Recording |
|
|
Playback |
|
|
If at any time you need to switch off the digital audio output, set this to Off, otherwise leave it On.
79
En
