Pioneer DVR-320-S Playing DVD discs, Press STANDBY/ON to switch on, To stop playback, press Stop

04Getting started

STANDBY/ON OPEN/CLOSE

ENTER

PLAY

STOP

1 Press STANDBY/ON to switch on.

Also turn on your TV and make sure that it is set to the correct video input.

2 Press OPEN/CLOSE to open the disc tray.

3 Load a disc.

Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double- sided DVD-Video disc, load it with the side you want to play face down).

•If you want to play a DTS audio CD, please first read the note on page 29.

4 Press PLAY to start playback.

•If you’re playing a DVD-Video or Video CD, a disc menu may appear when you start playback. Use the

(cursor) buttons and ENTER to navigate DVD disc menus, and the number buttons and ENTER for Video CD menus.

•See the following sections for more details on playing specific kinds of discs.

5 To stop playback, press STOP.

6When you’ve finished using the recorder, eject the disc and switch the recorder back into standby.

• To open/close the disc tray, press OPEN/CLOSE. Remove the disc before putting the recorder into standby.

•Press STANDBY/ON to switch the recorder into standby.

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

PLAY Press to start playback.

If RESUME is displayed on-screen, play- back starts from the place last stopped.

STOP Press to stop playback.

You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed.

		Press to skip to previous/next chapter/title.
PREV	NEXT
		(You can also use the front panel +/– but-
		tons to do this during playback.)
		Except VR mode: During playback, enter a
		chapter number then press ENTER to skip
		directly to that chapter within the currently
		playing title.
	CLEAR	On some discs, you can also use the num-
		ber buttons to select numbered items in
	ENTER	the disc menu.
		VR mode only: During playback, enter a
		title number then press ENTER.
		All: Press CLEAR to clear a number entry
		and start again.

BACK CM SKIP (Commercial back/skip) Each press skips backward/forward progressively up to a

maximum of 10 minutes forward or three minutes back.

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to change the playback speed.

While paused, press to advance a single frame in either direction.

Press to display the ‘top’ menu or menu of TOP MENU MENU a DVD-Video disc (these are often the

same).

Use the cursor buttons to navigate DVD- Video disc menus; press ENTER to select

ENTER items.

RETURN Press to return to the previous level of a

DVD-Video disc menu.

28

En