Pioneer DVR-320-S Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs

Models: DVR-320-S

1 100
Download 100 pages 5.87 Kb
Page 29
Image 29

Getting started

04

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN CD and MP3 only: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3 disc). (You can also use the front panel +/buttons to do this during playback.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number entry and

CLEAR

start again.

 

ENTER

 

Note

If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/ receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels on page 41).

Scanning doesn’t work with WMA tracks.

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you can select what to watch.

PLAY Press to start playback.

Video CD only: If RESUME is displayed on- screen, playback starts from the place last stopped.

STOP Press to stop playback.

Video CD only: You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed.

 

 

 

Press to skip to previous/next track. (You

 

 

PREV

NEXT

 

 

 

 

can also use the front panel +/buttons to

 

 

 

 

 

 

 

 

do this during playback.)

 

 

 

 

When a PBC menu is displayed, press to

 

 

 

 

display the previous/next page.

 

 

 

 

 

 

 

 

 

During playback, enter a track number

 

 

 

 

 

 

 

 

then press ENTER to skip directly to that

 

 

 

 

track.

 

 

 

 

Press CLEAR to clear a number entry and

 

 

 

CLEAR

start again.

 

 

 

 

 

 

 

 

While a PBC menu screen is displayed,

 

 

 

 

 

 

 

ENTER

use to select numbered menu items.

BACK CM SKIP Video CD only: Each press skips backward/ forward progressively up to a maximum of 10 minutes forward or three minutes back.

Note that this function doesn’t work when playing in PBC mode.

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to change the playback speed.

While paused, press to advance a single frame (forward direction only).

RETURN Press to display the disc menu of a Video CD/Super VCD playing in PBC mode.

29

En

Page 29
Image 29
Pioneer DVR-320-S operating instructions Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs