Pioneer DVR-320-S operating instructions Manual CH Setting, Channel Swapping

12The Initial Setup menu

After auto scanning has finished, the channel mapping screen appears showing which channels have been assigned to which program numbers.

	Initial Setup
Channel Mapping					1/7
Pr	System	CH Name	Pr	System	CH Name
1	B/G	26	9	B/G	9
2	B/G	33	10	B/G	25
3	B/G	23	11	B/G	11
4	B/G	30	12	B/G	12
5	B/G	37	13	B/G	13
6	B/G	35	14	B/G	14
7	B/G	39	15	B/G	15
8	B/G	26	16	B/G	16

Use the PREV/NEXT buttons to display the previous/next page.

3 Press HOME MENU to exit this screen.

Note

•You can fine-tune individual stations using the Manual CH Setting feature. See Manual CH Setting below for how to use this.

Manual CH Setting

The channel skip function lets you skip channels where there is no station so that as you change channels using the CHANNEL +/– buttons or the number buttons, you only change to channels that have a station.

The manual tuning function allows you to manually tune to stations, should you need to.

1 Select ‘Manual CH Setting’, then ‘Next Screen’.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video In/Out	Channel Swapping
Audio In	G-Code CH Setting
Audio Out
Language
Recording
Playback

Press ENTER to go to the country setting screen.

2 Select your country.

Initial Setup
Basic	Auto Manual Channel Setting
Tuner	Manual
Video In/Out	Channel Country	Singapore
Audio In	G-Code
Audio Out

Language

Recording

Playback

76

3Press ENTER to go to the manual channel setting screen.

	Pr 1
Skip	Off
CH System	Western Euro
Channel	2
AFT	On
Level
Sound System	B/G
Name

•Use the CHANNEL +/– buttons or the number buttons to change channels.

From this screen there are eight parameters you can set:

•Skip – If you want to skip the displayed channel (because there is no station assigned to that channel), change the Skip setting to On.

•CH System – Set the channel system used in your area or region.

•Channel – Change the channel number assigned to the current preset.

•AFT (Auto Fine Tune) – When set to On, the station is automatically tuned; set to Off to manually fine tune (see below).

•Level – Set the AFT level (see above).

•Sound System – Set the sound system used for the current channel.

•Name – Move the cursor right then input a name for the current station, (up to five characters) then press

ENTER.

Channel Swapping

The preset swap feature lets you swap the channel assignments of different programs. This is so that you can group together station presets which naturally go together.

1 Select ‘Channel Swapping’.

Initial Setup
Basic	Auto Channel Setting	Next Screen
Tuner	Manual CH Setting
Video In/Out	Channel Swapping
Audio In	G-Code CH Setting
Audio Out
Language
Recording
Playback

En