Additional information | 13 |
Chapter 13
Additional information
Resetting the recorder
If you need to, you can reset the recorder to all its factory settings.
1 Make sure that the recorder is on.
2 Press and hold STOP and press STANDBY/ ON.
The recorder turns off with all settings reset.
Setting up the remote to control your
TV
You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table below.
1Press and hold down the CLEAR button, then enter the maker code for your TV.
The LED indicator on the remote controls lights.
See the table below for the list of maker codes. If there is more than one code given for your make, input the first one in the list.
•If the maker’s name of your TV doesn’t appear in the table below, you will not be able to use this remote to control your TV.
2 Press TV to check that the remote works with your TV.
If the remote is set up correctly, the TV should switch on/ off. If it doesn’t and there is another code given for your maker, repeat step 1 with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control with your TV.
Button | What it does |
TV | Press to switch the TV on/off (standby) |
|
|
INPUT SELECT | Press to change the TV’s video input |
|
|
TV VOLUME | Use to adjust the TV volume |
|
|
TV CHANNEL | Use to change TV channels |
|
|
Maker | Code |
Alba | 66 |
|
|
Bush | 76 |
|
|
Finlux | 84 |
|
|
Fisher | 61, 65 |
|
|
Fujitsu | 77 |
|
|
Funai | 67 |
|
|
Goldstar | 79 |
|
|
Grandiente | 87 |
|
|
Grundig | 51, 82 |
|
|
Hitachi | 56, 60, 83, 86 |
|
|
ITT | 70 |
|
|
Mitsubishi | 59 |
|
|
Nokia | 53, 81 |
|
|
Panasonic | 58, 72 |
|
|
Philips | 57, 85 |
|
|
Pioneer | 50, 80 |
|
|
RCA | 68 |
|
|
Salora | 71 |
|
|
Samsung | 73, 75 |
|
|
Sanyo | 74 |
|
|
Sei | 78 |
|
|
Sharp | 52 |
|
|
Sony | 54 |
|
|
Tandy | 69 |
|
|
Telefunken | 64 |
|
|
Thomson | 62 |
|
|
Toshiba | 55 |
|
|
Victor | 63 |
|
|
87
En
