Using Other Functions
Switching A/B Speaker System
This unit has three types of speaker systems A, B, A&B. This switch allows you to select the speaker system you will use.
| Amplifier | MAIN | SUB | |
| TONE | BASS/ |
|
|
| TREBLE |
|
| |
|
|
|
| |
|
|
| EFFECT/ | |
| DISPLAY | VIDEO | CH SEL. | |
| DIMMER | SELECT |
|
|
1 | STATUS | SPEAKER | LOUDNESS | INPUT |
| A/B |
| ATT. | |
SYSTEM |
| TAPE 2 | SIGNAL | |
| SETUP |
| MONITOR | SELECT |
1 |
A(SP3A):
1Use the SPEAKER A/B button on the remote control's SUB screen (or SP SYSTEM A/B on the front panel) to cycle through the different speaker
systems.
The button cycles through the speaker systems as follows: A]B]A&B]off.
In what way the sound will be output depends on the selections you made in "SPEAKER SYSTEMS" (p.38) and you choices here. See the explanations for a guide to how the sound will be output when you have chosen NORMAL SURROUND (see p.38- 39).
Sound is output from speaker system A and the same signal is output from the pre out terminals. (Subwoofer output depends on the settings in SPEAKER SYSTEMS and the source type.)
B(SP3B): | Sound is output from the two speakers in speaker |
| system B. Multichannel sources will be downmixed to |
| these two speakers and the same signal is output from |
| the FRONT pre outs. |
A&B(SP3AB): | Sound is output from speaker system A's FRONT |
| speakers and the B speakers. The main channels will |
| be downmixed to the FRONT speakers. (Subwoofer |
| output depends on the settings in SPEAKER SYSTEMS |
| and the source type.) If you have set the FRONT |
| speakers to "SMALL" the low frequencies of all the |
| channels are output from the subwoofer. The same |
| sound is output from the B speakers and the FRONT |
| pre out terminals. |
OFF(SP3 ): | No sound is output from the speakers. Depending on |
| the input signal and settings in "SPEAKER SYSTEMS" |
| sound may be output from the subwoofer. The same |
| sound is output from the pre out terminals as when |
| selecting speaker system A (above). |
memo | • Depending on the settings in "SPEAKER SYSTEMS" and the MULTI CH IN SELECT, output from the | |
surround back pre out terminals may change. | ||
|
•When using headphones the speakers are switched off.
•Please use speakers with a nominal impedance rated 6Ω
68
En
