Pioneer VSA-AX10 Expert, Amplifier Remote Control, PIONEER component bearing the Î mark

Using Other Functions

The PIONEER SR System: Operating other PIONEER components

Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the amplifier's remote control at the remote sensor on the front panel of the amplifier. The amplifier then sends the remote control signals to the other devices via the CONTROL OUT terminal.

CONTROL

OUT IN CONTROL

IN

OUT

Amplifier

Remote Control

+

–

+

–

+

–

PIONEER

component bearing

the Î mark.

To CONTROL IN terminal of another PIONEER component bearing the Î mark.

memo	• You can also control PIONEER components (and those made by other manufacturers) by pointing the
	amplifier's remote control directly at the respective component. This type of operation does not re-
	quire control cords. All you have to do is recall the appropriate stored settings (see p.60-61).

•If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able to use this unit's remote control.

•If you use this feature make sure an analog (audio and/or video) connection has been made between the amplifier and the component(s).

EXPERT

71

En