Pioneer VSA-AX10 THX Audio Setup, THX Ultra2 Subwoofer Setup, Use the 23 buttons to select on or

Advanced Setup

THX Audio Setup

THX Ultra2 Subwoofer Setup

If you have a high-precision speaker that outputs very low frequencies, the sound may have too much boom because of the resonant frequencies in the room where your subwoofer is setup. If you have this problem use the THX Ultra2 Subwoofer Setup to adjust the low end sounds.

1 AMP

DVD/LD

VCR1

/DVR

VCR2

VCR3

3 TV

			2
Amplifier		MAIN	SUB	SETUP
				REMOTE
TONE	BASS/			CD
	ATREBLE
				CD-R/
		EFFECT/		TAPE1
DISPLAY	VIDEO	CH SEL.		TUNER
DIMMER	SELECT
	SPEAKER		INPUT	VIDEO
STATUS		LOUDNESS
	A/B		ATT.	SAT
SYSTEM		TAPE 2	SIGNAL	TV
SETUP		MONITOR	SELECT	CONTROL

1Turn on the amplifier and your TV, press the AMP on the remote

control.

Make sure your TV is set to the amplifier.

2Press the SUB button on the amplifier screen.

3Press the SYSTEM SETUP button.

The menu possibilities appear on your TV.

STANDBY/ON

ENTER

5˜∞˜2˜3˜ENTER buttons

4	System Setup
	[ Auto Surround Setup ]
	[1.		Input Assign]
	[2.		Surround Setup]
	[3.		Expert Setup]
	[	4. THX Audio Setup		]

[Exit]

4Use the 5∞ buttons to select THX

AUDIO SETUP. Press ENTER.

5Use the 5∞ buttons to select

ULTRA2 SW SETUP. Press ENTER.

6If your subwoofer is THX Ultra2 certified, select YES. Use the 23

buttons and then press ∞.

If your subwoofer isn't THX Ultra2 certified, but you still want to switch the boundary gain compensation to ON, select YES but the results may not be satisfactory.

5

6

7,8

88

En

4.THX Audio Setup

[ 1.Ultra2 SW Setup ]

[ 2.SurBack SP Position ] [ 3.Re-Equalization ]

[Return]

4.1. Ultra2 SW Setup

THX Ultra2 SW?

[ YES ]

Boundary Gain

Compensation

[OFF]

[Return]

4.1. Ultra2 SW Setup

THX Ultra2 SW?

[ YES ]

Boundary Gain

Compensation

[ OFF ]

[Return]

7Use the 23 buttons to select ON or

OFF.

8Use ∞ to select RETURN then press

ENTER.

9If you want to continue THX AUDIO SETUP use the 5∞ buttons to select

the next setup and press ENTER.

Go on to the next page.

10 If you want to finish THX AUDIO SETUP use the 5∞ buttons to select

RETURN and press ENTER. Then use the 5∞ buttons to select EXIT and press ENTER.

memo	• If you select YES the BASS PEAL LEVEL (see
	p.84) will be cancelled.
	• See the THX section in Techno Tidbits (p.93-94)
	for more information on the THX Ultra2
	Subwoofer feature.