Pioneer VSA-AX10 DVD Audio/MULTI CHANNEL IN Playback, Press MULTI CH IN button on the, Main

Basic Operation

DVD Audio/MULTI CHANNEL IN Playback

There are two types of MULTI CH IN modes: DIRECT and ADJUST. In the latter you can add sound features and in the former these are fixed. To select these two settings (as well as OFF) follow the procedure below.

	MAIN		1 Press MULTI CH IN button on the
Amplifier			remote control’s AMP MAIN screen.
	MAIN SUB		Use the button to cycle through the
LISTENING MODE
			different multi channel in modes.
SURROUND		/SACD)
		(DVD-A

STEREO			MULTI CH	1
	THX	STANDARD
/DIRECT			IN		DIRECT: This is a true playback of the signal from the
	ADVANCED	ADVANCED	LISTENING	2
					MULTI CH INPUT terminals, output without digital
	CINEMA	CONCERT	CH SEL.
MIDNIGHT	DIGITAL		ACOUSTIC		processing. You can only control each channel level.
	NR		CAL.

		ADJUST: This setting allows three types of control
		over the sound output: You can: 1) control each
		channel level individually; 2) apply the settings in
		SURROUND SOUND SETUP (p.38-44) and 3) apply
		different sound features (p.53-55).
		OFF: Cancels the MULTI CH IN modes.
	2	Use the LISTENING CH SEL button to
1	2	select the number of input channels.
		You can select 2 or 8 channels. For best sound quality
		use 2 channels when you listen to stereo sources.

memo

•The default setting is DIRECT.

•You can’t select listening modes for MULTI CH IN. Selecting a listening mode cancels the MULTI CH IN.

•In DIRECT mode, if the center speaker is set to “NO” the signal for that channel is divided between the front speakers. If any other speakers are set to “NO” the signal for that (those) channel(s) won’t get output at all.

•If the amplifier is in DIRECT mode, and you set sound features (p.53-55) on, the mode will change to ADJUST automatically.

See MULTI CH IN SELECT (p.86) for more on MULTI CH IN playback.

56

En