Overview
Important Safety Notes
In some countries the DA950 is supplied with a molded mains lead and plug. In other countries, or if the supplied lead is not used, the following information applies:
•Please read all the instructions furnished with your printer before you attempt to operate it. Save these instructions for future use.
•Always use the power cord suppled with the machine and plug it into a properly grounded outlet that's located near the machine and is easily accessible. The power cord socket outlet is the primary means of disconnecting the machine from the AC power. The socket outlet should be near to the equipment and should be easily accessible.
WARNING! An improperly grounded machine can present a potentially serious shock hazard to the user.
•DO NOT use an adapter plug on the power cord or wall outlet.
•DO NOT remove the ground pin from the power cord.
•DO NOT route the power cord over sharp edges or trap it between pieces of furniture.
•Ensure that there is no strain on the power cord where it passes between the equipment, walls or furniture.
•Be certain the area in front of the wall receptacle into which the machine is plugged is free from obstruction.
•Do not remove covers. The machine covers serve to enclose hazardous parts. If the machine has been dropped or has otherwise had the covers stressed in any way, report this condition to your Pitney Bowes Customer Service Representative.
•To reduce the risk of fire and/or electrical shock, do not attempt to disassemble this machine. If service is required, contact your Pitney Bowes Customer Service Representative.
