Printer Menus

Using the Main Menu (continued)

1. Address Layout (continued)

B. Distance from Top

This menu item allows you to change the position of the record without moving the bank of Print Cartridges. The printer achieves this by reducing the available area used for printing. Therefore, increasing the setting decreases the print area. The recommended setting for Distance From Top is 0.00.

Press the + or – buttons to increase or decrease the Distance from Top from 0 to 3.0". Press the Enter button to enable the desired measurement.

C. Line Spacing

Press the + or – buttons to increase or decrease the Line Spacing (i.e., 3, 4, 6, 8 lines/inch or Automatic), defined in lines per inch. Automatic line pitch selection is based on industry-standard definitions for line spacing for each print pitch and style selected. The printer will automati- cally select the correct setting for the font and size of the characters being printed.

D. Orientation

The choices are Normal and Inverted.

Select Normal for most applications. This tells the printer that the bottom edge of the material is against the Rear Chassis Assembly. The print will appear upside down when viewed from the front of the printer.

The Inverted option tells the printer that the top edge of the material is against the Rear Chassis Assembly. The print will appear right side up when viewed from the front of the printer.

NOTE: If Orientation is set to Inverted, Address Layout option A will be “Distance to right”.

For instructions how to use the menus and select an op- tion, refer to page A-4.

A-8

Page 74
Image 74
Pitney Bowes DA950 manual Distance from Top, Line Spacing