Printer Menus
Using the Setup Menu (continued)
1. Stop On Feed Err (Error)
Use this option to stop the printer from feeding more media when an error occurs. Otherwise the printer will continuously feed media until the record is accurately printed before continuing onto the next record. Stop- ping the printer when an error occurs is helpful when the media is in short supply.
For instructions how to use the menus and select an op- tion, refer to page
2. Feeder Signal
The Feeder Signal option is for feeders that work with 5 volt DC signals. The printer will signal to the feeder when it receives one or more records. If an error oc- curs when the Stop On Feed Error option is enabled the feeder signal will be cleared to stop the feeder.
A. None
This option disables the feeder signal.
B. On/Off Control
This option turns a signal on whenever one or more re- cords are in the buffer to be printed. The signal is turned off once the last record in the buffer is being printed. The signal will also turn off when an "Early Feed Error" oc- curs while the Stop On Feed Error option is enabled.
C. Pulse Off Control
This option turns on a signal when:
•the sensor detects the leading edge of the envelope for the last address to be printed at the print heads or
•when an early feed error is detected (if the Stop On Feed Error option has been selected).
In either case, the signal will be cleared one second later.
