Polycom 6400-S manual Configuring provider interface settings

User Guide V2IU 6400-S Converged Network Appliance

To configure subscriber interface settings:

1.In the navigation bar, select Network.

\

2. In Subscriber Interface Settings, highlight and replace the default IP Address and Subnet Mask.

3. If you are configuring network settings, see the instructions in Configuring the Network on page 4-5.

4. If you want to configure a management interface that is different than the default, complete all of the configuration tasks, then see Configuring a management interface on page 7-9.

5. Press Submit.

Note	After submitting the new configurations, you need to reconnect to the 6400-S using
	the new IP address and subnet mask before you can continue with the
	configuration.

Configuring provider interface settings

The provider interface defines the interface between the 6400-S and internal voice, video and data devices. This interface is generally connected to the private network.

4 - 2