User Guide V2IU 6400-S Converged Network Appliance

To configure basic settings:

1.In the navigation pane, select Firewall.

2.In the section: Basic LAN and WAN Firewall Settings, enable the management services that you want to reach the 6400-S by checking the appropriate box for:

Allow HTTP access through firewall

Allow TELNET access through firewall

Allow SSH access through firewall

Allow SNMP access through firewall

3.Configure Allow TCP Port according to the rules in "Basic settings rules" on page 31. This setting allows traffic with the specified TCP port to terminate on the 6400-S.

4.Configure Allow UDP Port according to the rules in Basic settings rules on page 6-3. This setting allows traffic with the specified UDP port to terminate on the 6400-S.

5.Skip Enable PPTP server Pass-through. This setting is not currently used.

6.Enter an IP address in PPTP Server IP Address. This setting is not currently used.

7.To restrict Trusted Management to the Management Interface, see Configuring a management interface on page 7-9.

8.Press Submit.

6 - 2

Page 44
Image 44
Polycom 6400-S manual To configure basic settings