Polycom 6400-S manual Configuring the Network, Setting Description

	Configuring Network Settings
Setting	Description
10baseT-HD	10Mbits per second using half duplex
	transmission
10baseT-FD	10Mbits per second using full duplex
	transmission
100baseT-HD	100Mbits per second using half duplex
	transmission
100baseT-FD	100Mbits per second using full duplex
	transmission
Autonegotiate	The 6400-S autonegotiates link rate and
	duplex with the directly attached device.

5.Press Submit.

Configuring the Network

Use network settings to configure the default gateway address, and the primary and secondary DNS servers.

Packets destined for IP addresses not known to the 6400-S are forwarded to the Default Gateway for handling. For the 6400-S the Default Gateway MUST be the next hop router attached to Port 1 (the Subscriber interface).

The primary DNS server is used by the 6400-S to resolve domain names to IP addresses. The secondary DNS server is used in the event the primary DNS server is unreachable.

4 - 5