Polycom 6400-S manual Features, Physical Connections and Specifications

User Guide V2IU 6400-S Converged Network Appliance

Features

•Resolves firewall traversal problems at the Network Operations Center for VoIP by providing a VoIP application layer gateway (ALG) or voice and video aware firewall that supports SIP, MGCP and H.323

•Resolves firewall traversal problems at customer offices for VoIP by providing NAT-Traversal capability for SIP.

•Supports up to 10,000 concurrent VoIP calls or up to 85 Mbps of H.323 video traffic

•Protects the enterprise LAN using a stateful packet inspection (SPI) firewall for both voice and data traffic

•Performs static IP routing

•Provides integrated test tools to facilitate problem isolation

•Performs TFTP relay for IP phone images

•Uses a simple web based GUI for configuration and management

•Supports logging to external syslog servers and interfaces to network management systems using SNMP

Physical Connections and Specifications

Port	Description
Subscriber (ETH0) Ethernet	This port is a 10/100/1000 auto sensing
Port 1	port. It is connected through an Ethernet
	switch to IP phones, IADs or PCs installed
	on the public network.
Provider (ETH1) Ethernet	This port is a 10/100/1000 auto sensing
Port 2	port. It is connected to the private network.
Out of Band Management	This port can be configured to allow out of
Port 3	band management sessions. It is typically
	connected to a private management
	network.
Console Port (COM 1)	This port is used to establish a local
	console session with the EdgeProtect
	using a VT100 terminal or emulation
	program. The baud rate is 9600. It is used
	for debug or local diagnostic purposes
	only.

1 - 4