MGC-50/MGC-100 Getting Started Guide
By default, the first IP Network Service you define is set as the system default. When defining additional IP Network Services this default can be changed. For more details, see the MGC Administrator’s Guide, Chapter 3.
Assigning Network Services to the IP/IP+ Cards
For each IP card installed in the MCU, you need to define which Network Service is used, thereby defining the network properties connected to that card. Usually, one Network Service is used for all IP cards, enabling the MCU to automatically manage the conferencing resources.
The association between the network properties and the IP cards is done in two stages. In the first stage, while defining the IP Network Service, you add all the IP cards that can use this Network Service. In the second stage, you define for each IP card which Network Service it uses to manage conferencing calls.
To assign IP service settings to the IP card:
1.In the Browser area, expand the MCU tree.
2.Expand the MCU Configuration tree.
3.Expand the Cards tree.
