Polycom DOC2230A manual H.323 dialog box opens

Chapter 3 - Initial System Configuration

The H.323 dialog box opens.

This dialog box is skipped when defining a SIP-only Network Service.

11. Define the following parameters:

Table 3-11: H.323 Parameters

Field	Description
Forwarding	Select this check box to enable Forwarding.
	Forwarding enables the MCU to indicate the IP
	address of another card for handling the incoming
	call when the first card is busy.
	Note: It is not recommended to use Forwarding
	when using either Board Hunting or Pseudo
	Gatekeeper modes.

3-31