Chapter 3 - Initial System Configuration
The Add Span dialog box opens.
b.Define the following parameters:
Table
Field | Description |
|
|
Circuit ID | The Circuit Identification is a logical number used to |
| identify the span to the MGC Manager. This number |
| is later used to assign the span to the ISDN network |
| card. |
| Type any positive integer from 0 to 65535 to be used |
| as the circuit identification number in the MGC |
| Manager. |
| Note: |
| If other Network Services are already defined, make |
| sure to use numbers other than those already |
| assigned to the existing services. |
|
|
Circuit Order | The Circuit Order determines the order in which an |
| MCU uses the spans to dial out. |
|
|
c.Once you have defined all the identification numbers click OK.
The Add Span dialog box closes and you are returned to the Spans and Phones dialog box.
