Polycom DOC2230A manual Click the IP-Network Parameters tab

Chapter 3 - Initial System Configuration

4.Double-click the IP card.

Alternatively, right-click the IP card icon, and then click Properties.

The Card Settings-Common Parameters dialog box opens. The Common Parameters tab is for viewing purposes only.

5.Click the IP-Network Parameters tab.

6.In the IP-Network Parameters tab clear the Null Configuration check box to enable assignment of the IP Network Service.

7.In the Circuit ID box enter the circuit ID that was defined for this card in the IP Network Service—Spansdialog box. For additional information on circuit IDs see “IP SPAN Options” on page 3-43.

8.Click Apply.

The name of the IP Network Service is displayed in the Service Name field.

3-51