Polycom DOC2230A manual Field Description Network, Static Routes

Chapter 3 - Initial System Configuration

Table 3-7: Settings Options

Field

Description

Network

DHCP-Obtain IP	Select this check box to use a DHCP server for
Address	automatic assignment and tracking of IP addresses
Automatically	to the conferencing devices. When the DHCP server
	is used, the IP address of the card appears as
	0.0.0.0.
	You may prefer not to select this check box if you
	need to:
	• Establish a static IP address.
	• When dialing in directly to the card, using the
	card’s IP address.
Subnet Mask	Enter the subnet mask of the MCU’s IP card. If the
	DHCP is used, the subnet mask is automatically
	retrieved from the DHCP server and cannot be
	modified. The detected number appears in the
	card’s Properties-Settings-IP Network Parameters
	box.
Default Router	Enter the IP address of the default router. If the
	DHCP is used, the IP address is automatically
	retrieved from the DHCP server and cannot be
	modified.
Static Routes
Routes Table	Displays the list of static routes currently defined in
	the system. Up to five routes can be defined in
	addition to the Default router. The order in which the
	routers appear in this list determines the order in
	which the system will look for the endpoints on the
	various networks, if not found on the local LAN.
	To add a router to the Static Routes table, click the
	plus (+) button. For more details see “Defining Static
	Routes” on page 3-26. To delete a router from the
	Static Routes table select the router to remove, and
	then click the minus (-) button.
	You can define one router with different destinations.

3-25