MGC-50/MGC-100 Getting Started Guide

To delete a circuit identification entry:

In the Spans pane, click the Circuit Identification entry you want to delete and click the Minus button.

The entry is deleted.

Defining Dial-In Numbers

The numbers to be used for dial-in connections to multipoint conferences are allocated to the MCU by your service providers.

16.Specify the range of dial-in numbers by entering the first and last numbers in the range. You can define several ranges for the same span.

a.In the Dial In Phone Numbers pane of the Spans and Phones dialog box, click the Plus button

The Add Phone Num dialog box opens.

b.In the First Phone Number box, enter the first number in the range of dial-in numbers.

c.In the Last Phone Number box, enter the last number in the range of dial-in numbers.

d.Click OK.

The dialog box closes. You are returned to the Spans and Phones dialog box. The number range appears in the Dial-In Phone Numbers list.

e.Repeat steps a-d for each number range you need to enter.

3-18

Page 42
Image 42
Polycom DOC2230A manual To delete a circuit identification entry