UPS Setup

2.Remove the four M4 screws securing the stabilizing bracket to the cabinet rear panel and remove the bracket (see Figure 3). Retain the hardware for later use.

NOTE Be sure to retain the stabilizing bracket and hardware for later re-assembly onto the cabinet.

3.Remove the three M10 bolts securing the rear shipping pad to the pallet and remove the shipping pad (see Figure 3).

NOTE Hold the back of the cabinet so that the bolts can be removed easily without the cabinet rolling backward.

4.Remove the two M10 bolts securing the front shipping bracket and remove the bracket (see Figure 3).

Front Shipping

Bracket

M10 Bolts

Stabilizing

Bracket

M10 Bolts

M4 Screws

Shipping Pad

Figure 3. Removing the Brackets and Shipping Pad

12

Powerware® 9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com