5.Insert the two supplied nylon bushings inside the wiring access holes on the UPS conduit landing plate (see Figure 15).
6.Remove the MBM/PDM wiring access cover and the conduit landing plate and retain.
7.Tilt the top of the module forward and slide the module onto the
UPS Electronics
Unit
Nylon Bushings in UPS
Wiring Access Holes
MBM/PDM Wiring Access
Cover and the Conduit
Landing Plate (Removed)
Figure 15. Installing the MBM or PDM (MBM Shown)
Powerware® 9155 UPS | 31 |