Communication

Installing Communication Options and Control Terminals

To access and install the communication options and control terminals:

1.Remove the front covers of all cabinets, starting with the top cabinet. Press and release the handle latch at the bottom of each cover and then lift the cover up and off the cabinet (see Figure 33).

Figure 33. Removing the Front Covers

2.Install the appropriate X-Slot card and/or necessary cable(s) into the top cabinet (see Figure 32 and Figure 34).

54

Powerware® 9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev D www.powerware.com