Communication
4.Route the cable(s) to the approximate location of the cover access holes.
5.Connect the cables to the appropriate location.
See “Communication Options” on page 57 or “Control Terminals” on page 61 for detailed information.
6.Reinstall the front covers, starting with the bottom cabinet (see Figure 36).
Hang the top edge of the cover on the cabinet first, then lower the bottom edge and snap into place. Be sure the cables fit in the access holes in the covers.
Figure 36. Reinstalling the Front Covers
7.Continue to “Operation” on page 65 to start up the UPS.
56 | Powerware® 9155 UPS |